Mercedes-Benz Xentry VCI
- 100% warranty
- No Chinese fake
- Remote support & installation
The VCI multiplexer (vehicle interface) XENTRY Diagnosis VCI uses an interface for diagnostics and repair, as well as programming electronic control units for Mercedes.
Diagnostics XENTRY VCI does not have its own PC core, battery, fan or display. It is controlled via the XENTRY Diagnostic Panel via WLAN or via a USB cable, which we can also provide.
Convenient Xentry VCI Multiplexer with a small, rugged design (no PC core, battery, fan or display)
Firmware updates required in rare cases.
It can be used for all models.
No power supply required for external power supply.
XENTRY Diagnosis Kit4
America - Europe - Africa - Middle East - Asia - Australia
Message us:
Easier to use
The display is a 13.3 inch, multitouch, full HD display with a brightness of 400 nits.XENTRY Diagnosis Pad 2 comes with four USB type A 3.0 ports and one USB type C portLocated on the front side are two buttons that you can configure individually using ConfigAssistTo provide a more stable WiFi connection to XENTRY Diagnosis VCI, a second WiFi card has been installed, the WiFi stick in the XENTRY Diagnosis Pad 2 has been discontinued.
Much faster
XENTRY Diagnosis Pad 2 comes with the latest Intel® CoreTM i5 processor (1.6 GHz, turbo up to 3.9 GHz)The main memory has 16 GB DDR41 TB SSD hard drive (with 3000 MB/s read and write speed)
More convenient
The connection to XENTRY Diagnosis VCI is made using a permanently installed WLAN card.XENTRY Diagnosis Pad 2 is passively cooled and therefore it does not have a fan.XENTRY Diagnosis Pad 2 can be run on battery power for up to 8 hours.
It supports full range of diagnostics functions, wiring diagrams and offline W223 W206 diagnosis.
| Operating system | Windows 10 IoT LTSC Enterprise |
| Processor | Intel® CoreTM i5 |
| Main memory | 16 GB DDR4 |
| Hard drive | 1 TB SSD |
| Display | 13.3″, full HD multitouch, brightness 400 nits, resolution 1920 x 1080, antiglare |
| Dimension | Wait approx. 338 x 240 x 33 mm (W x L x H) |
| Weight | 2.3 kg |
The VCI used so successfully before in XENTRY Diagnosis Kit 3 is also part of the scope of supply for XENTRY Diagnosis Kit 4.
Product advantages
The practical multiplexer in a compact and sturdy design (no PC core, battery, fan, or display)
No more diagnosis updates required – only firmware updates on rare occasions
Can be used for all model series
Does not require an adapter for an external power supply
| Network Cable | USB 2.0 |
| WiFi stick | 802.11b/g/n |
| Microprocessor | Intel MX6 Solo |
| RAM | 512 MB DDR3 |
| LEDs | 5 status LEDs |
| Power supply |
8 V to 28 V From the vehicle battery via the diagnosis connection cableor via a connected USB cable *Important: The contact socket in the vehicle must be protected with a fuse with a maximum rating of 6 A/32 V. |
| Certifications VCI | FCC, CE, RoHS |
Message us:
- Is this tool original Mercedes Benz?
-
- Yes, It is.
- Will the system support official SCN coding?
-
Yes the system support official Mercedes SCN online coding.
- How to upgrade the Xentry Diagnosis?
-
The KIT4 comes with an official Xentry license. So everything will be online download and upgrade.
- Can I use it in the middle east?
-
Yes, you can.
- What will be the ordering process?
-
Make the payment and we will ship it in 1-2 days:
1. PayPal +5% commission
2. Bank transfer
- How long the order lead time?
-
The order processing lead time will be 1-4 working days after the payment confirmed.
- What is the difference between XENTRY Diagnosis Kit 3 and XENTRY Diagnosis Kit 4?
-
- The device concept was retained as with XENTRY Diagnosis Kit 3. XENTRY Diagnosis Pad 2 has undergone a fundamental change.
- The WiFi connection between XENTRY Diagnosis Pad 2 and the VCI is no longer established with two WiFi sticks, XENTRY Diagnosis Pad 2 now comes with a second WLAN card. This ensures a stable connection over lengthy distances.
- XENTRY Diagnosis Pad 2 is equipped with a 13.3 inch, multitouch, full HD display with a brightness of 400 nits, four USB type A 3.0 ports, and one USB type C port
- What is fundamentally new in the XENTRY Diagnosis Kit 4?
- Can I Order the VCI Multiplexer Alone?
-
YES, you can!
- What is included in the initial scope of delivery for XENTRY Diagnosis Kit 4?
-
The initial scope of delivery includes the following:
- XENTRY Diagnosis Pad 2 with power supply unit including power supply plug,
- XENTRY Diagnosis VCI
- USB connection cable (5 m)
- OBD cable (16-pin)
- user information, and safety information.
Please note that the cable adapter is no longer included in the standard scope of supply and it can be ordered individually, as required.
- How can I connect XENTRY Diagnosis Pad 2 and XENTRY Diagnosis VCI to each other?
-
There are two ways of doing so:
WLAN connection: As usual you can set up a direct connection per WLAN. Coupling must be performed for this. This should take place either during initial commissioning through ConfigAssist or later on in the VCI Manager.
Cable connection: via the supplied USB connection cable.
